| Order number | Active axes | Displacement [µm] (-250 to +250 V) -10/+20% | Cross section A x B / ID [mm] | Length L [mm] ±0.3 | Max. shear load [N] | Axial stiffness [N/µm] | Capacitance[nF] ±20% | Axial resonant frequency [kHz] |
|---|
|
| P-111.01 | X | 1* | 3 x 3 | 3.5 | 20 | 70 | 0.5 | 330 |
|
| P-111.03 | X | 3* | 3 x 3 | 5.5 | 20 | 45 | 1.5 | 210 |
|
| P-111.05 | X | 5 | 3 x 3 | 7.5 | 20 | 30 | 2.5 | 155 |
|
| P-121.01 | X | 1* | 5 x 5 | 3.5 | 50 | 190 | 1.4 | 330 |
|
| P-121.03 | X | 3* | 5 x 5 | 5.5 | 50 | 120 | 4.2 | 210 |
|
| P-121.05 | X | 5 | 5 x 5 | 7.5 | 40 | 90 | 7 | 155 |
|
| P-141.03 | X | 3* | 10 x 10 | 5.5 | 200 | 490 | 17 | 210 |
|
| P-141.05 | X | 5 | 10 x 10 | 7.5 | 200 | 360 | 28 | 155 |
|
| P-141.10 | X | 10 | 10 x 10 | 12 | 200 | 230 | 50 | 100 |
|
| P-151.03 | X | 3* | 16 x 16 | 5.5 | 300 | 1300 | 43 | 210 |
|
| P-151.05 | X | 5 | 16 x 16 | 7.5 | 300 | 920 | 71 | 155 |
|
| P-151.10 | X | 10 | 16 x 16 | 12 | 300 | 580 | 130 | 100 |
|
| P-112.01 | XY | 1 x 1* | 3 x 3 | 5 | 20 | 50 | 0.5 / 0.5 | 230 |
|
| P-112.03 | XY | 3 x 3* | 3 x 3 | 9.5 | 10 | 25 | 1.5 / 1.5 | 120 |
|
| P-122.01 | XY | 1 x 1* | 5 x 5 | 5 | 50 | 140 | 1.4 / 1.4 | 230 |
|
| P-122.03 | XY | 3 x 3* | 5 x 5 | 9.5 | 40 | 70 | 4.2 / 4.2 | 120 |
|
| P-122.05 | XY | 5 x 5 | 5 x 5 | 14 | 30 | 50 | 7 / 7 | 85 |
|
| P-142.03 | XY | 3 x 3* | 10 x 10 | 9.5 | 200 | 280 | 17 / 17 | 120 |
|
| P-142.05 | XY | 5 x 5 | 10 x 10 | 14 | 100 | 190 | 28 / 28 | 85 |
|
| P-142.10 | XY | 10 x 10 | 10 x 10 | 23 | 50 | 120 | 50 / 50 | 50 |
|
| P-152.03 | XY | 3 x 3* | 16 x 16 | 9.5 | 300 | 730 | 43 / 43 | 120 |
|
| P-152.05 | XY | 5 x 5 | 16 x 16 | 14 | 300 | 490 | 71 / 71 | 85 |
|
| P-152.10 | XY | 10 x 10 | 16 x 16 | 23 | 100 | 300 | 130 / 130 | 50 |
|
| P-123.01 | XYZ | 1 x 1 x 1* | 5 x 5 | 7.5 | 40 | 90 | 1.4 / 1.4 / 2.9 | 155 |
|
| P-123.03 | XYZ | 3 x3 x 3* | 5 x 5 | 15.5 | 10 | 45 | 4.2 / 4.2 / 7.3 | 75 |
|
| P-143.01 | XYZ | 1 x 1 x 1* | 10 x 10 | 7.5 | 200 | 360 | 5.6 / 5.6 / 11 | 155 |
|
| P-143.03 | XYZ | 3 x 3 x 3* | 10 x 10 | 15.5 | 100 | 170 | 17 / 17 / 29 | 75 |
|
| P-143.05 | XYZ | 5 x 5 x 5 | 10 x 10 | 23 | 50 | 120 | 28 / 28 / 47 | 50 |
|
| P-153.03 | XYZ | 3 x 3 x 3* | 16 x 16 | 15.5 | 300 | 450 | 43 / 43 / 73 | 75 |
|
| P-153.05 | XYZ | 5 x 5 x 5 | 16 x 16 | 23 | 100 | 300 | 71 / 71 / 120 | 50 |
|
| P-153.10 | XYZ | 10 x 10 x 10 | 16 x 16 | 40 | 60 | 170 | 130 / 130 / 230 | 30 |
|
| Versions with inner hole |
|
| P-153.10H | XYZ | 10 x 10 x 10 | 16 x 16 / 10 | 40 | 20 | 120 | 89 / 89 / 160 | 30 |
|
| P-151.03H | X | 3* | 16 x16 / 10 | 5.5 | 200 | 870 | 30 | 210 |
|
| P-151.05H | X | 5 | 16 x 16 / 10 | 7.5 | 200 | 640 | 49 | 155 |
|
| P-151.10H | X | 10 | 16 x 16 / 10 | 12 | 200 | 400 | 89 | 100 |
|
| Versions for use in cryogenic and UHV environments |
|
| P-111.01T | X | 1* | 3 x 3 | 2.2 | 20 | 110 | 2 x 0.25 | 530 |
|
| P-111.03T | X | 3* | 3 x 3 | 4.4 | 20 | 55 | 6 x 0.25 | 260 |
|
| P-121.01T | X | 1* | 5 x 5 | 2.2 | 50 | 310 | 2 x 0.70 | 530 |
|
| P-121.03T | X | 3* | 5 x 5 | 4.4 | 50 | 150 | 6 x 0.70 | 260 |
|
| * Tolerances ±30%. |
| Piezo ceramic type: PIC 255. |
| Standard electrical interfaces: PTFE-insulated wire leads, 100 mm, AWG 32 (Ř 0.49 mm). Axial resonant frequency at 1 Vpp, unloaded, unclamped. The value is halved for unilateral clamping. |
| Capacitance at 1 Vpp, 1 kHz, RT. |
| Operating voltage: -250 to 250 V. |
| Operating temperature range: -20 to 85°C. |
| Standard mechanical interfaces: Ceramics (passive PZT). |
| Outer surface: Epoxy resin. |
| Versions for cryogenic and UHV environments |
| Operating temperature range: -269 to 150°C. |
| Standard electrical interfaces: Ta. contacting possible with conductive adhesive or welding. Displacement measured at room temperature. Reduced values at low temperatures. |
| Standard mechanical interfaces: Ceramic (Al2O3, 96% purity). |
| Outer surface: Epoxy resin. |
| Custom designs or different specifications on request. |
|
